TWIG Configurator

The PC application for controlling TWIG device settings and updating TWIG device firmware

Download the TWIG Configurator compatible with the device type

Click the link button TWIG Configurator below for download

TWIG Configurator Instructions

  • Control device settings for e.g. GPS, GPRS, security, power management, SOS, ManDown, quick dials and status keys.
  • Program settings to TWIG device and read settings from device.
  • Store settings in PC file and retrieve settings from PC file.
  • Security for device management.
  • For details of configuring devices over-the-air using GPRS or SMS configuration, or other over-the-air device communications, please refer to TWIG Integrator Kit.

Read more instructions

  • Use correct Configurator and FirmwareLoader matching your TWIG device type. Device type (TUP90EU, TCP90EU, TGP81EU) is printed in type label, on back side of the device.
  • Settings files saved from TWIG Configurator 3.06 are NOT cross-compatible between device types TUP90EU and TCP90EU.

System requirements

  • Windows 8, Windows 7, Windows Vista or Windows XP. USB port, TWIG USB-miniUSB cable and C-adapter or Programming Station.
  • Installation instructions: Save .exe file in a folder and run it.

NOTE:

  • How to preserve device settings during firmware update:
  • Before updating device firmware you should save device settings to PC file for later access, using TWIG Configurator.
  • After saving device settings you can program (“burn”) new firmware version.
  • After programming firmware and rebooting, if TWIG Configurator requests password then perform Device factory reset, using TWIG Configurator.
  • After device reset and reboot, edit device settings manually, or Read From File the saved settings back to device.

Technical tips

  • TWIG Configurator 3.06 does not require installing USB drivers but use Windows HID drivers instead (Windows 8, Windows 7, Windows Vista, Windows XP).
  • If while batch programming devices you want to prevent Windows from creating new driver files (VID and PID) for each new device, please contact TWIG Support for tips.
  • The over-the-air protocols (MPTP and GPRS) are backwards compatible from TGP81EU to TCP90EU to TUP90EU. For details please refer to TWIG Integrator Kit.

TWIG FirmwareLoader

Click the link button TWIG FirmwareLoader below for download